JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
OPERATING
INSTRUCTIONS
Clamp the workpiece if it does
not remain stationary due to its own
weight.
Do not strain the machine so
heavily that it comes to a standstill.
Grinding and cutting discs
become very hot while working; do
not touch until they have cooled.
Pull the plug from the socket-
outlet when not using the machine.
With the plug inserted and mains
voltage existing, the power tool still
has low power consumption even
when it switched off.
1. HAND GRIP AREAS
Always hold your angle grinder
firmly with both hands when
operating (See E).
2. ROUGH GRINDING
The best roughing results are
achieved when setting the machine
at an angle of 30° to 40°. Move
the machine back and forth with
moderate pressure. In this manner,
the workpiece will not become too
hot, does not discolour and no
grooves are formed.
Warning! Never use a cutting
disc for roughing.
E
