7
JCB-20USB
Instruction & User Manual
Maintenance
Remove the battery pack from the USB
power adaptor before cleaning and main-
tenance. This helps avoid the risk of electric
shocks and accidental injury.
WARNING!
m
Wipe the USB powder adaptor with a dry
or damp cloth.
Do not use a wet cloth.
Do not use detergent that contains
solvent or corrosive, abrasive
additives.
This risks damaging the surfaces
of the charger.
m
Clear the battery connection terminals and
the release button of dust and dirt after
each use.
Do not clean terminals by
inserting sharp objects in them, such
as screwdrivers and other similar
objects.
m
Stubborn contamination in areas hard to
access can be removed with compressed air
(max 3. bar).
m
Regularly check all fasteners, screws and
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
Never open the USB power adaptor. The
USB power adaptor has no internal parts that
the user can service or repair. Never try to
repair the USB power adaptor yourself. Take
to an authorised service centre.
WARNING!
Transport and Storage
m
If the USB power adaptor will remain
unused for any length of time, it should be
stored in the original packaging.
m
Store the USB power adaptor in a dry,
frost-free, well ventilated place with a
temperature of now more than 40 °C
m
Keep all USB power adaptors out of the
reach of children.
m
Always remove the battery from the USB
power adaptor before transport.
m
Ensure that the USB power adaptor is not at
risk of being exposed to excessive vibration
and shocks during transport, especially if the
USB power adaptor will be transported by
car or other vehicle.