SO53 3LE
Customer Helpline
0845 600 5526
SO53 3LE
Customer Helpline
0845 600 5526
OPERAtING
INstRuCtIONs
●
Clamp the workpiece if it does
not remain stationary due to its own
weight.
●
Do not strain the machine so
heavily that it comes to a standstill.
●
Grinding and cutting discs
become very hot while working; do
not touch until they have cooled.
●
Remove the plug from the
socket-outlet when not using the
machine.
With the plug inserted
and mains voltage existing, the
power tool still has low power
consumption even when it switched
off.
1. HAND GRIP AREAs
Always hold your angle grinder
firmly with both hands when
operating (See
6
).
2. ROuGH GRINDING
The best roughing results are
achieved when setting the machine
at an angle of 30° to 40°. Move
the machine back and forth with
moderate pressure. In this manner,
the workpiece will not become too
hot, does not discolour and grooves
are not formed.
warning!
Never use a
cutting disc for roughing.
3. CuttING
warning!
For cutting metal,
always work with the wheel
6