4
OvERvIEw OF ThE ApplIANCE COmpONENTS
⁄
¤
‹
›fi
fl‡
·
„
‰
‚
Â
⁄
¤
‹
›fi
fl‡
·
„
‰
‚
Â
⁄
¤
‹
›fi
fl‡
·
„
‰
‚
Â
BEFORE USE
For transportation, the On/off switch
fl
is
taped in the OFF (O) position. Remove and
discard the tape before use.
The vacuum must be fully charged for at least
16 hours before first use. The product must be
in the OFF (O) position to charge. Turn off the
adaptor charger after 16 hours.
The on-board light
fi
will illuminate to indicate
charging. It will always remain on while the
charger adaptor is switched on.
NOTE:
The vacuum is powered by
rechargeable nickel metal-hydride
batteries. Peak performance may
only be realised after the unit has
been charged and discharged two or
three times. Do not leave the
product in a discharged state for
an extended period. Do not
overcharge. Switch off the charger
adaptor after 16 hours. If unused,
the battery will remain charged for
several weeks, but we recommend
discharging the battery fully and then
recharging at least once per month.
⁄
¤
‹
›fi
fl‡
·
„
‰
‚
Â
1
Suction inlet
7
Body
2
Dust canister
8
Mains adaptor charger and base
3
Pleated canister filter
9
Dusting brush tool
4
Dust canister release button
10 Crevice tool
5
On-board light
11 Soft crevice tool
6
On/off switch
12 Extension hose