jcb 210X, Руководство по обслуживанию

Страница: 23 / 51

01 - Machine
06 - About this Manual
06 - Using the Manual
01 - 17 9813/9600-2 01 - 17
• Use the applicable Servicemaster diagnostics
tools. Refer to (PIL 33-57-03).
To help you reference the applicable information
as quickly as possible refer to Fault Finding in this
section. Tables are given for the primary fault types.
Applicable cross references are then given to the
specific fault finding, check procedures and systems
descriptions.
Remove and Install
Before removal of components or assemblies, clean
the applicable parts of the machine. After removal
cap open ports and hoses to prevent contamination.
Refer to (PIL 01-33-00).
Use new sealing elements such as gaskets and O-
rings.
Do not install defective components or assemblies. if
necessary replace them with new ones.
Dismantle and Assemble
Before dismantling an assembly clean it.
After dismantling, clean the individual components
and check them for wear and defects. If necessary
replace them with new ones.
During assembly use new sealing elements such as
gaskets and O-rings.
Torque Tightening
Use the torque tightening values contained in
the individual procedures (Remove and Install,
Disassemble and Assemble etc.). If no values are
specified, use the standard torque tightening values.
Refer to (PIL 72-00).
Always use the correct grade of fastener.
Consumable Products
Some procedures require the use of consumable
products such as lubricants, sealants, adhesives
and locking fluids. Use the correct products. Where
products are available from JCB the applicable part
numbers are given in the procedures. A complete list
of consumable products available from JCB is given
in this manual. Refer to (PIL 75-00).
After Sales
Some procedures require the use of equipment
such as special tools and PPE (Personal Protective
Equipment). Where special tools are available from
JCB the applicable part numbers are given in the
procedures. Full details about the applicable special
tools are given in this manual. Refer to (PIL 78-00).
Use the correct PPE to comply with local and
employer regulations.