13
21-18OS
Instruction & User Manual
The vibration emission value of the power
tool is tested under EN 62841-1 and EN
62841-2-4, and can vary during operation
depending on the following usage conditions:
WARNING!
m
How the power tool is used and the
materials being cut, sanded or drilled.
m
The power tool being in good condition and
well maintained.
m
Using the correct accessory for the power
tool and ensuring it is sharp and in good
condition.
m
The tightness of the grip on the handles and
if any anti-vibration accessories are used.
m
The power tool being used as intended by
its design and these instructions.
m
The declared vibration total value may also
be used in a preliminary assessment of
exposure.
THIS POWER TOOL MAY CAUSE
HAND-ARM VIBRATION SYNDROME
(HAVS) IF USAGE IS NOT
ADEQUATELY MANAGED.
To be accurate, an estimation of exposure
level in the actual conditions of use should
also take account of all parts of the operating
cycle. These include times when the power
tool is switched off and when it is running
idle but not actually doing work. This may
significantly reduce the total exposure level
over the working period, helping to minimize
your vibration exposure risk.
WARNING!
m
ALWAYS use sharp and undamaged
accessories, bits, chisels, drills and blades.
m
Maintain this power tool in accordance with
these instructions and keep well lubricated
(where appropriate).
m
If the power tool is to be used regularly then
invest in anti-vibration accessories.
m
Avoid using power tool in temperatures of
10
°
C or less.
m
Plan your work schedule to spread any high
vibration power tool use across a number
of days.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841-1 and
EN 62841-2-4
Sanding
Vibration Emission
Value (a
h,DS
)
9.5 m/s
2
Uncertainty (K)
1.5 m/s
2
