jcb 2069289, Руководство оператора

Страница: 141 / 208

Maintenance
Body and Framework
129 9821/6100-4 129
Body and Framework
General
Clean
Keep all intakes and grilles clear from snow, ice and debris.
Debris can collect under the boom. Remove all debris from under the boom.
Thoroughly dry the piston rams and protect them with clean transmission or hydraulic oil if necessary.
Check (Condition)
1. Make sure that all of the guards and protective devices are in position, secured by their locking devices
and free from damage.
2. Inspect all of the steelwork for damage. Include the following:
2.1. Examine all of the lifting point welds.
2.2. Examine all of the pivot point welds.
2.3. Examine the condition of all the pivot pins.
2.4. Check that the pivot pins are correctly in position and secured by their locking devices.
3. Check the steps and handrails are undamaged and correctly attached.
4. Check for broken, cracked or crazed window glass and mirrors. Replace the damaged items.
5. Check that the lamp lenses are undamaged.
6. Check that all of the attachment teeth are undamaged and correctly attached.
7. Check that all of the safety and instructional labels are undamaged and in position. Install new labels where
necessary.
8. Note any damaged paintwork for future repair.
9. Inspect the machine for broken or loose fasteners.
Slew Ring Bearings
Lubricate
Make sure that the slew ring is kept full of grease.
With the cab in the straight ahead position as shown, the grease point is located near the front of the slew
ring. Refer to Figure 101.
Notice: Do not overgrease the slew ring as this will result in the displacement of the grease seal.