18z-1, 19c-1, 19c-1 EP
24
25
Please see operator manual for full details.
Troubleshooting/FAQs
Issue / FAQ
Resolution/Answer
My machine will not start
Ensure the start up sequence has been followed (Page 14).
If machine still will not start contact dealer
I can’t activate the Hydraulics
Here are some of the possible reasons:
• When the machine hydraulics are live and you lift the left hand pod
you will need to re-select ‘2-GO’ when the pod is returned to the
down position.
• The left hand pod is in the raised position.
• There is a fault on the keypad.
• Engine isn’t switched on.
• If there is an error on the machine and an error code is displayed
on the LCD screen – which would inhibit the hydraulics.
If hydraulics still won’t activate contact dealer
Why is there an audible buzzer in
the cab when I’m lifting a large load?
(19c-1 EP only)
The lift overload warning system has detected a load that is near the
limits of the machine, reduce load to prevent machine overturning
Can I disable the lift overload
warning indicator when not object
handling? (19c-1 EP only)
To disable lift overload warning indicator when not object handling
press button ‘C’ on the switch panel (refer to page 9)
500hrs Greasing – Does it matter
if greased every day?
No, there is no impact on life of the pivot pins or bushes
Machine Attachments
Description
Weight
(kg)
Intended Use
Hydraulic
Requirements
Mechanical Quickhitch
13.7
Quick change of attachments
None
Hydraulic Quickhitch
22
Quick change of attachments
Quickhitch circuit
Bucket GP 150mm
20.2
General excavation / Bulk loading loose
material
None
Bucket GP 230mm
22.2
General excavation / Bulk loading loose
material
None
Bucket GP 300mm
24.4
General excavation / Bulk loading loose
material
None
Bucket GP 400mm
28.7
General excavation / Bulk loading loose
material
None
Bucket GP 460mm
30.3
General excavation / Bulk loading loose
material
None
Grading / Ditching Bucket
760mm
36.8
Grading, finishing, landscaping and ditching
None
Grading / Ditching Bucket
1000mm
44.9
Grading, finishing, landscaping and ditching
None
Earth Drill – 1500Nm
63.8
Drilling 160mm – 900mm holes
1 Hi-Flow aux
service
Breaker – HM012T
107
Breaking up tarmac, concrete, rock
1x single acting
aux service
Breaker –HM100Q
129
Breaking up tarmac, concrete, rock
1x single acting
aux service
ATTACHMENT WEIGHTS ARE A GUIDE ONLY, ALWAYS CHECK YOUR OWN ATTACHMENTS