JC MACHINERY & TOOLS INC.
Quality We Trust
6
vii.
The adjustment of the Pressure Wheel
According to the various thickness of material, it can be adjusted the magnitude of
pressure by switching the modulated screw. It will increase by clockwise, and it
decrease by anticlockwise.
viii.
The Familiar Malfunction and Elimination
Phenomena
Reason
The way of eliminate
NO turning of the
electric machine
Non direction of power supply
Check the power supply whether it
is connected or not
The damage of Insurance wire by
burning
Change the insurance wire
The damage of speeding circuitry
board lines By burning
Change the speeding circuitry
board
The damage of electric machine by
burning
Change the electric machine
Non speeding of the
electric machine
Speeding knob is unsightly
Tight the speeding knob
Power pipe was shocked out
Replacing the speeding wire board
Non heating up
Thermal wedge
The damage of electric pipe by
burning
Replacing the electric pipe
The damage of temperature
control instrument
Replacing the temperature control
instrument
Thermocouple with malfunction
Change the thermocouple
The burning of thermal
wedge
The damage of temperature
control instrument
Change the temperature control
instrument
ix.
Maintenance
Please clean the dunghill in the thermal wedge and the mud in the chain guard and
oiled the whole machine to the dry place when not using it.
x.
Supplied Accessories
Insurance pipe
15A
5pcs
0.75A
5pcs
Screw drive
1pcs
Interior hexangular spanner
2pcs
