JC MACHINERY & TOOLS INC.
Quality We Trust
__________________________________________________________________
www.jc-tool.com [email protected]
1
This machine is high quality semi-automatic hot air welding machine; it is of new
design and technology. Please read this manual carefully before using this machine,
and retain it for future reference.
i.
Applications
It can be applicable for overlap welding.
ii.
Notice
1.
Unplug the tools before opening it to avoid of being hurt by exposed wires or
component inside the machine with power.
2.
Incorrect use of it can cause fire and explosion hazard because of high
temperature, especially near combustible materials and explosive gases.
3.
Don’t touch heater tube and nozzle when they are hot. They may cause burns.
Don’t point hot air flow in the direction of people or animals.
4.
The voltage rating stated on the welder must correspond to line/mains voltage
(220V).
The drop cable / wire with protective earthed conductors can only be used.
5.
To ensure operator safety and reliable operation of equipment, the power supply
must be installed power supply and leakage protection at the construction site.
6.
It must be running at the correct use of manipulation of the operator, or they
may cause a fire or explosion caused by high temperature.
7.
Don’t use welder in the water, or on a muddy construction site, to avoid flooding,
rain or moisture.
iii.
Technical Parameters
Voltage
230 or 120
V
Frequency
50/60
Hz
power
1700
W
Temperature
50
～
620
℃
(122
～
1148
℉
)
Air volume
180(Max)
L/min
Welding width
40
mm
Welding speed
0.5-5.0
Size( L*W*H)
275*237*432
mm
Weight
5
kg
