background image

3

2

ComplianCe plate and serial number.

thank you for choosing Sculpt fireplaces as your heater of choice.

 

Your fireplace is the result of careful design, artisan engineering and safety tests. 

If it is properly installed, used and maintained, you may be sure that you will have an outstanding 

heating feature in your home for years to come. 

We advise you to read through this guide in order to become acquainted with the installation 

methods specific to your fireplace.

It is recommended that this fireplace be installed by a qualified and licensed trades professional. 

You will find in this guide the answers to most of your questions, should you require further 

assistance we recommend you contact your retailer.

Before igniting your fireplace for the first time, please carefully read this manual.

Follow 

@sculptfireplacecollection

 on Instagram, 

Sculptfireplacecollection 

on Facebook and be 

sure to post your latest masterpiece installed with the hashtag 

#sculptfires.

We hope we’ve helped make you the envy of your friends this winter and for years to come.

From all of us,

Sculpt Fireplace Collectionion

Congratulations!

iMPortant

Heating capacity of the following appliances are a guide only and refers to areas with 2.4m ceilings 

and 6 or more star rated buildings. Heating output may vary depending on factors such as building 

characteristics, quality of insulation and type of firewood used and climate zone.

all dimensions shown are approximate. check all dimensions accurately prior to installation. in line with 

our policy of continuous improvement, we reserve the right to alter specifications without notice.

all units comply and MUSt be installed to australian & new zealand Standard aS/nzS 2918:2001. 

When in use some parts may become hot, a suitable fire guard is recommended where very young, 

elderly or infirm are concerned. 

tHe bordelet units in tHis manual Conform to australian and new Zealand standards 

as/nZs 2918:2001 domestiC solid fuel burning applianCes & as/nZs 4012/4013(2014).

the instructions in this manual are recommendations only, the distributor and manufacturer bears no liability to the interpretation of these instructions.

© copyright 2019 Sculpt fireplaces collection

Содержание Eva 992


















Отзывы: