background image

 

            JB-lighting Lichtanlagen GmbH     Sallersteigweg 15     D-89134 Blaustein  Telefon  ++49(0)7304 9617-0

    

 

- 46 -

 

7.3 AUTSEL / Automatic fixture selection 

 
If the Autsel function (automatic selection of fixtures) was assiged to a cue and this 
cue is activated, the LEDs of those fixtures are lit in the Fixture Selection block, which 
are stored on this cue. The moving lights thus selected are active and their 
parameters can be modified.  
 

 

7.3.1 Activating and deactivating the Autsel function 

To activate the AUTSEL function, consecutively press the Edit cue in the Combi section and the cue key, 
on which the cue to be edited is stored. The following display is shown:  

 
Press the corresponding softkey to activate the AUTSEL 
function. When the function is active, the softkey is displayed 
inverted.  

 
 
 
 
 
 

Press the softkey AUTSEL again and the function is 
deactivated. 
 

 

7.4 Editing the name 

Press the softkey NAME. The field on the display is shown inverted. Then delete the 
previously entered name with the arrow key. Enter the new name with the double-assigned 
keys of the Cues/Chases/Sequences section. 
Press the softkey NAME again, the entry is stored and the labelling mode is left.  

7.5 Editing fixture parameters 

After pressing the softkey MODIFY, all DMX values entered for the fixtures can be modified. When the 
field is shown inverted on the display, you have access to the keys of the Feature Selection block The 
values stored on these keys can be changed with the encoder wheels or the Preset keys, when the 
inidvidual keys have been activated.  
To store the mofidications, press the Store key and the storage matrix appears on the display. Modify the 
matrix as planned. Press Store key again to confirm the storage (the field MODIFY on the display is no 
longer shown inverted). 
 

 Press Edit key again or the ESC key to leave the Edit menu. 

 

7.6 Copying a cue to another cue key 

Enter the Edit menu of the Combi section. Activate a cue by pressing the corresponding cue key. Press 
and hold the softkey COPY and select the storage place (cue key), on which you wish to store the cue. 
Release both keys again and the storage process is completed. You can now recall the corresponding 
cue from both cue keys.  

Содержание Licon 1X


































































































































Отзывы: