BES
DPM-B
BES
DPM-B
BES
DPM-B
BES
DPM-B
BES
DPM-B
4
For 3cc syringes the adaptor is needed.
Assemble the adapter by clipping onto the
barrel.
4. Adapter Use
(for 3cc Syringe only)
Operation
Take the barrel filled with solder paste and
place the corresponding piston into the
barrel.
1. Pay attention to the fact that the plunger
enters with its cylindrical part in the syringe
and the direcction of the teeth angle
corresponds to the upper image. Otherwise,
the DPM does not work properly.
2. Insert the plunger into te piston and
press the piston against the solder paste to
eliminate the air inside the barrel.
Thread the tip onto the syringe barrel.
1. Piston Placement
The DPM works with
3cc and 5cc Syringes. Ask your solder paste supplier for this format or fill the
JBC syringe barrel with solder paste.
2. Plunger Placement
3. Tip Placement
1
2
