-
4
-
-
5
-
JBL SYNTHESIS SDEC-3500/SDEC-4500
JBL SYNTHESIS SDEC-3500/SDEC-4500
Rear Panel Connections
REAR PANEL CONNECTIONS
H
POWER CORD SOCKET:
Connect the power cord here and then connect to to a mains
output with voltage from 85V to 270V, 50/60Hz.
I
LOCATE:
Press this button to illuminate the Locate button on the front and identify the device
within the London Architect software.
J
RS-232:
This connection for external calibration and configuration unit is not active at this time.
K
ETHERNET:
This is the main connection for the proprietary system control network, and for
third-party Ethernet control. The SDEC must be connected to an Ethernet hub during the
calibration process.
L
BLU-Link CONNECTORS:
Connect these ports to other SDEC-4500P and SDEC-4500X
products to enable BLU-Link to send and receive audio data. Please Note: When using the
SDEC-4500X or SDA Series amplifiers with BLU-Link you must connect the two units through
the BlueLink connection, using a
Cat. 5e patch cable.
M
CONTROL INPUTS:
The SDEC-4500P can be configured for full-range or bi-amp operation
by using these control inputs. The SDEC-3500 does not need or use this connection.
N
INPUT/OUTPUT CARD POSITIONS:
These connectors provide the balanced and unbalanced
connections for the input/output card fitted in the four card slots in a JBL Synthesis SDEC
device. A green LED next to the slot assignment letter A, B, C or D indicates that an input
card is fitted and an amber LED when an output card is fitted. The analog connections are
balanced/unbalanced, on Phoenix/Combicon connectors. Depending on which model and
configuration you have purchased will determine which input/output card has been installed
at the factory. Please make certain that you have ordered the correct wiring kit for your
application and system configuration as designed and recommended by JBL Synthesis.
BlueLink
H
I
J
K
L
M
N
Input/Output Assignments
INPUT/OUTPUT ASSIGNMENTS
SDEC-3500
The SDEC-3500 supports up to 7.1 input with up to 7.1 output. The input and output
assignments are described in the table below. You must make the correct connections from the
surround processor output to the amplifier input for the system to work correctly.
The correct Synthesis Interconnect kit includes all the necessary connections for using the SDEC
in the Synthesis system.
CONNECTION NOTES
• Please follow the Input/Output Assignments table for correct connections.
• You will need to use the Ethernet network port on the rear panel of the unit for the final
calibration process. You can connect the SDEC-3500 through any standard Ethernet hub.
SDEC-3500 INPUT/OUTPUT ASSIGNMENTS
Surround Processor to SDEC-3500 Inputs
Number
Channel
SDEC-3500
1
Left Front
A1
2
Right Front
A2
3
Center Front
A3
4
Left Side
A4
5
Right Side
B1
6
Left Rear
B2
7
Right Rear
B3
8
Subwoofer
B4
SDEC-3500 Outputs to Amplifiers
Number
Channel
SDEC-3500
9
Left Front
C1
10
Right Front
C2
11
Center
C3
12
Left Side
C4
13
Right Side
D1
14
Left Rear
D2
15
Right Rear
D3
16
Subwoofer
D4
Содержание Synthesis SDEC-3500
Страница 1: ...SDEC 3500 SDEC 4500 DIGITAL EQUALIZER...
