JBL SRX900 Series, Руководство пользователя

Страница: 32 / 51

User Manual
32
Subnet Mask
When the network mode is set to Static, the subnet can be set one octet at a time by using
the encoder to select the desired octet, pressing the knob to enable editing, rotating the
knob to select the desired value, and pressing the knob to store the change. Pressing the
Back button cancels the change.
Gateway
When the network mode is set to Static, the gateway can be set one octet at a time by using
the encoder to select the desired octet, pressing the knob to enable editing, rotating the
knob to select the desired value, and pressing the knob to store the change. Pressing the
Back button cancels the change.
101 NETWORK: GATEWAY V
11
72. 72.
11
6. O. 1 6. O. 1
101 NETWORK: SUBNET V
255. 255. 255. 255. 0 255. 255. 0
IP Address
When the network mode is set to Static, the IP can be set one octet at a time by using the
encoder to select the desired octet, pressing the knob to enable editing, rotating the knob
to select the desired value, and pressing the knob to store the change. Pressing the
Back
button cancels the change.
101 NETWORK: IP V
11
72. 72.
11
6. O. 76 6. O. 76
15.3 NETWORK
Mode
Press the Encoder to set the Network Mode to DHCP or Static.
101 NETWORK: MODE
DHCP Static
V
LF Mode
LF Mode sets the crossover frequency used in the factory presets.
• For full-range systems, the setting options are Full-Range (FR) and 80 Hz
• For subwoofers, the setting options are 60 Hz and 80 Hz.
Reset All DSP
The User DSP section can be returned to factory default values by entering this screen, se-
lecting the OK button with the encoder, and pressing it. On the confirmation screen, select
Confirm, then press the knob a second time to reset the DSP parameters. This operation
cannot be undone and will disconnect the device from connected software. Pressing the
Back button at any time exits to the menu without making a change.
101
60Hz 80 Hz
DSP: LF MODE V
RESET 101
RESET ALL USER DSP TO DEFAULTS?
THIS CAN NOT BE UNDONE.
NO OK
V