User Manual
14
connectors, refer to
Section 10-Networking
7 - XLR Connectors:
Input and output balanced XLR connectors for audio connectivity. The input connector passes signal directly
from the input to the output, bypassing DSP for zero latency. The output connector continues to function even under power loss.
8 - Rigging Link Bar:
Adjustable central rigging bar for connecting cabinets together and selecting angles. For more information refer
to the
SRX900 Rigging Manual .
9 - Amplifier Heatsink:
Aluminum fins for cooling the SRX900 internal amplifier. No external fans are used for cooling the amplifiers.
10 - Power Connectors:
Neutrik powerCON TRUE1® TOP (True Outdoor Protection) connectors for power connectivity. These rugge-
dized sealed connectors feature an IP65 rating as well as UL 50E certification for UV resistance. The input connector is used to supply
power but also serves as the mains ON/OFF switch. The output connector can be used to connect multiple units together. Refer to
Section 9-Power
for additional information on power connectivity and requirements.
10 - Mount Point for SRX900RC Rain Cover:
Six M6 mounting points for attaching the SRX900 RC Rain Cover. The cover protects
the screen, controls, and connectors from moisture. Refer to
Section 16 - Rain Cover
for more information.
6.2 SRX918S AND SRX928S REAR PANEL
The SRX918S and SRX928S share the same rear panel layout and features. The illustrations and description below apply to both models.
1
2
4
3
5
7 8
9
6
10
1 - LCD Screen:
Allows users to access speaker operating modes, DSP parameters, networking settings, and much more. Controlled
with the
Encoder
and the
Back
button. Refer to
Section 15-LCD
for more information on navigation and additional details on func-
tionality.
2 - Locate LED:
Software-controlled LED for speaker identification. The speaker can be set to Locate mode via JBL Performance
software or from the LCD, to bi-directionally visually identify the speaker. This is especially useful during setup, when physical speak-
ers are matched with software equivalents.
3 - Encoder:
Controls the LCD menus and master volume of the unit. Turn the knob to navigate through the menus. Press the encod-
er to confirm an action or enter a menu. Refer to
Section 15 - LCD
for more information on using the Encoder to control LCD screen.
Содержание SRX900 Series
Страница 1: ...User Manual ...
Страница 51: ......
