i
IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT
SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT
1.
Read instructions - All the safety and operating instructions should be read before the product is
operated.
2.
Retain instructions - The safety and operating instructions should be retained for future reference.
3.
Heed Warnings - All warnings on the product and in the operating instructions should be
adhered to.
4.
Follow Instructions - All operating and use instructions should
be followed.
5.
Water and Moisture - The product should not be used
near water - for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
6.
Carts and Stands - The product should be used only
if a cart or stand is recommended by the
manufacturer.
6a.
A product and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart combination to overturn.
7.
Wall or Ceiling Mounting - The product should be mounted on a wall or ceiling only when and as
recommended by the manufacturer.
8.
Ventilation - The product should be situated so that its location or position does not interfere with
its proper ventilation. For example, the product should not be situated on a bed, sofa, rug, or
similar surface that may block the ventilation openings; or, placed in a built-in installation, such
as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
9.
Heat - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products that produce heat. If placed near an amplifier, check with the manufac-
turer for applicability.
10.
Power Sources - The product should be connected to a power supply only of the type described
in the operating instructions or as marked on the product.
11.
Grounding or Polarization - Precautions should be taken so that the grounding or polarization
means of an product is not defeated.
12.
Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the product.
13.
Cleaning - The product should be cleaned only as recommended by the manufacturer.
14.
Power Lines - An outdoor antenna should be located away from power lines.
15.
Nonuse Periods - the power cord of the product should be unplugged from the outlet when left
unused for a long period of time.
16.
Object and Liquid Entry - Care should be taken so that the objects do not fall and liquids are not
spilled into the enclosure through the openings
