JBL PRO TEMP b 10, Руководство пользователя

Страница: 14 / 81

8
Technical data
Type PRO TEMP
®
b 10 PRO TEMP
®
b 20 PRO TEMP
®
b 40 PRO TEMP
®
b 60
Power supply cable (1) 1.5 m
Switching power supply (2)
Voltage AC Input
230-240 V / 50-60 Hz
Switching power supply (2)
Voltage DC Output
24 V
Switching power supply (2)
Power
35 W 60 W
Heating cable supply line
(4a) length
2 m
Heating cable heating
wire (4c) wattage
10 W 20 W 40 W 60 W
Heating cable heating
wire (4c) length
3.6 m 4.9 m 7 m 9 m
Mounting suction cup (5)
quantity
20 x 30 x 30 x 40 x
Aquarium 40-120 L 60-200 L 90-300 L 300-600 L
Aquarium 40-80 cm 60-100 cm 80 – 120 cm 120 – 200 cm

NOTE
• Installation can be carried out only in empty aquarium without substrate.
• The heating cable (4) has a certain length of cold, non-heating supply line (4a) on both sides. The
transition from the cold supply line to the heating part is indicated by a marking (4b) on the line.
Initial operation
Installation in the aquarium
1. Clean the bottom panel of the aquarium from the inside (dust-free).
Lay the heating wire (4c) in loops at an equal distance of approx. 8 – 10 cm on the bottom panel
(Fig. 3) by using the enclosed mounting suction cups (5). Make sure the heating wires (4c) do not
crisscross or kink. Moisten the suction cups slightly beforehand for better adhesion.
2. Lead the two cold supply lines (4a) out of the aquarium.
JBL
PRO
TEMP
®
b 10, b 20, b 40, b 60
Substrate Heater
en