Remove the orange wire cover by inserting a small
screwdriver into the notch between the two terminals and
prying upwards. Disconnect the tweeter wires from the
terminal. Reinstall the cover after removing the tweeter.
Detach the tweeter by turning it counterclockwise to
unlock it, then pull it away from the woofer while feeding
the wires through the pole piece.
Install the woofer phase plug and turn it clockwise to lock
it in place.
05
Figure 5a.
Converting the P-432, P-532 and P-632 to a component system using the optional P-Kit
(sold separately), as shown on pages 5 and 6.
Separating the tweeter and woofer, as shown in Figures 5a and 5b.
Figure 5b.
P-Series Owner's Manual 5/25/99 9:46 AM Page 5
