SPECIFICATIONS
P10SW
P12SW
Peak Dynamic
Power
†
:
300 Watts
500 Watts
Amplifier
Power (RMS):
150 Watts
250 Watts
Driver:
10" PolyPlas
™
12" PolyPlas
™
Inputs:
Line-level (switchable to LFE)
Line-level (switchable to LFE)
and speaker-level with
and speaker-level with
5-way binding posts
5-way binding posts
Low-Pass
Frequency:
Variable from 50Hz to 150Hz
Variable from 50Hz to 150Hz
Frequency
Response:
27Hz – Low-pass
25Hz – Low-pass
crossover setting
crossover setting
Dimensions
(H x W x D):
17-3/4" x 12-1/4" x 14-1/2"
19-3/4" x 14-3/8" x 16-1/2"
(451mm x 311mm x 368mm)
(502mm x 365mm x 419mm)
Weight:
33.5 lb/15.2kg
43 lb/19.5kg
2
DESIGN GOAL:
Bring the thrill of live performance and movie sound to the
home environment by calling on JBL’s professional engineering leadership.
TWEETER TYPE:
Pure-titanium dome with EOS™ waveguide
WOOFER TYPE:
Cast-aluminum basket with HeatScape™ motor structure
CROSSOVER NETWORK:
Straight-Line Signal Path™ (SSP)
ENCLOSURE DESIGN:
Sealed
PROFESSIONAL REFERENCE:
Studio Monitor
OWNER’S GUIDE
P R O D U C T
L I N E :
MODEL:
P10SW, P12SW
PERFORMANCE
™
SERIES
© 2005 Harman International Industries, Incorporated.
All rights reserved.
Part No. 361803-001
PRO SOUND
COMES HOME
™
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
516.255.4JBL (4525) (USA only)
www.jbl.com
† The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of a
resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
JBL and Harman International are registered trademarks, and Performance Series, Pro Sound Comes Home and
PolyPlas are trademarks, of Harman International Industries, Incorporated.
Dolby and Pro Logic are registered trademarks of Dolby Laboratories.
DTS is a registered trademark of DTS, Inc.
All features and specifications are subject to change without notice.
Performance P10/12SW OM 10/26/05 9:02 AM Page 2
