8
Controls (continued)
When the SEL button (2) is held over 2 seconds, the unit will
I-VOL is the volume level the unit will play
To adjust
the I-VOL level, first select the I-VOL mode by pressing button (2) until I-VOL appears
on the display panel. Turn VOL knob (2) within 5 seconds to adjust the I-VOL level
from a minimum of I-VOL 00 to a maximum of I-VOL 45. This feature controls the max
volume level desired when powering the unit on.
To adjust the area selection, first select the area mode by pressing button (2) until REG
appears on the display panel.
To adjust the beep mode, first select the beep mode by pressing button (2) until BEEP
appears on the display panel. Turn VOL knob (2) within 5 seconds to select between
BEEP 2ND, BEEP ON, and BEEP OFF. Select BEEP 2ND when you wish to hear BEEP
sound whenever any button is pressed for more than 2 seconds. Select BEEP ON when
you wish to hear BEEP sound whenever any button is pressed. Select BEEP OFF then
no beep sound would be heard.
Simply turn the spindle knob (2) to increase or decrease volume. Current volume setting
is briefly indicated on the display panel from 00 to 45.
2-2. I-VOL, AREA, BEEP 2ND Selection
4. MODE Button(3)
Note:
5. BD/LD Button(6)
a. I-VOL (Initial Volume) Control
b. REG (Region) Control
c. BEEP Control
3. VOLUME Control (2)
enter into a submenu.
Once entered, a single press of the SEL button will result in the following functions:
when the unit is first turned on.
This unit also incorporates memory
retention. For example, if you power the boat off at volume 45 and your initial volume
setting was at 30, the unit will turn back on at 30. If however, you power the boat off at
volume 15 and your initial volume setting was at 30, the unit will turn on at 15. The unit
will always remember the lowest volume as a way of protecting your hearing.
Use the spindle knob to choose USA, EURO (Europe) ASIA,
or AUST (Australia).
Press this button to select Radio, CDP, USB and AUX.
A valid USB drive must be inserted into the USB port in order for that mode to appear.
This button works 2 functions.
a. Shortly press the BD/LD button to select the desired band F1, F2, F3, AM1, AM2.
b. In order to emphasize the bass and the treble at low volume, press and hold the BD/LD
button for about 3 seconds. The display "LOUD" is indicated on the display.
To cancel loudness function, press and hold BD/LD again.
I-VOL --> REG --> BEEP
The IEQ feature creates a realistic atmosphere for the style of music you select using the
latest digital sound technology.
Pressing this key repeatedly allows you to select from the following features :
- "FLAT" display - normal operation mode
- "CLASSICS" display - for the dramatic depth of classical music in an auditorium
- "POP" display - for the electric excitement of stadium pop
- "ROCK" display - for the subtle extension of the music's dimensions
- "DSP OFF" display - cancel the sound feature
Press MUTE button(14) to mute sound. Press it again to resume sound output.
6. IEQ button(4)
. MUTE button (14)
7
9
Controls (continued)
