background image

Explanation of Graphic Symbols

The exclamation point within an equilateral triangle is intended
to alert the users to the presence of important operating and
maintenance (servicing) instructions in the literature accompa-
nying the product. 

The lightning flash with the arrowhead symbol, within an equi-
lateral triangle, is intended to alert the user to the presence of
insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of elec-
tric shock to humans. 

CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER. 

NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED PERSONNEL.

ATTENTION:  POUR EVITER LES RISQUES DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE. AUCUN

ENTRETIEN DE PIECES INTERIEURES PAR L’USAGER. CON-

FIER L’ENTRETIEN AU PERSONNEL QUALIFIE. AVIS: POUR

EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION,

N’EXPOSEZ PAS CET ARTICLE A LA PLUIE OU 

A L’HUMIDITE.

The IEC fuse symbol pictured at the left represents an approved,
user replaceable fuse. When replacing a fuse, make sure to
replace with only the correct type and fuse rating. 

1. Read Instructions

– Before operating your new JBL LSR product, please read all safety

and operating instructions.

2. Keep these instructions

– For future reference and troubleshooting purposes, retain

these instructions.

3. Heed all warnings

– All warnings in this user manual should be followed.

4. Follow Instructions

– By following instructions presented in this guide, you should be

able to quickly enjoy an accurate and safe monitoring system.

5. Water and Moisture

– Do not use this apparatus near water – for example, bathtub,

sink or in the shower, regardless of how well you sing.

Important Safety Precautions

2

CAUTION

ATTENTION

DO NOT EXPOSE

TO RAIN OR MOISTURE!

NE PAS EXPOSER Á

LA PLUIE NI Á L'HUMIDITÉ!

Содержание LSR25P






















Отзывы: