JBL ES150PW, Руководство по обслуживанию

Страница: 2 / 59

- CONTENTS -
BASIC SPECIFICATIONS …………….……..…………..1
DETAILED SPECIFICATIONS ……….……..…………..2
PACKAGING……..………………..………….….….….....5
CONTROLS/CONNECTIONS………………..…...…..…6
OPERATION ……..………………….……...…….….…...8
SUBWOOFER EXPLODED VIEW/PARTS LIST……....9
TRANSMITTER EXPLODED VIEW/PARTS LIST…....10
TEST SET-UP AND PROCEDURE…..….……………..11
BLOCK DIAGRAMS…………………………….……..…13
SUBWOOFER AMP TROUBLESHOOTING……. ……17
TRANSMITTER TROUBLESHOOTING……. …………18
RECEIVER PCB TROUBLESHOOTING…….….. ……19
P.C.B. DRAWINGS….…………………………………….20
ELECTRICAL PARTS LIST ..……….……….……….…27
IC/TRANSISTOR PINOUTS..……..….…….….….….….33
SCHEMATICS…………………………………………….47
ES150PW SPECIFICATIONS
Amplifier Power (RMS): 300 Watts
Peak Dynamic Power *: 500 Watts
Driver: 10" (250mm) PolyPlas™
Inputs: Line Level or LFE
Low-Pass Frequency: Variable from 50Hz to 150Hz (24dB/octave)
Frequency Response: 27Hz – 150Hz
Operating Range Up to 75' (22m), depending upon conditions
RF Operating Frequency 2.4GHz
Subwoofer Dimensions (H x W x D): 18" x 13-1/4" x 16-1/8" (457mm x 337mm x 409mm)
Transmitter Dimensions (H x W x D): 3-3/4" x 4-7/8" x 3-15/16" (95mm x 124mm x 100mm)
Weight:
39 lb/17.7kg
JBL continually strives to update and improve existing products, as well as create new ones. The specifications
and details in this and related JBL publications are therefore subject to change without notice.
*
The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to
minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
ES150PW
1