• Remember to press the appropriate
Input Selector
0
button
before functions are changed to another device.
3. When all the steps have been entered, press the
M N KL
9
button to enter the commands. The red light under the
Input Selector
0
will blink and then turn off and the
Program
Indicator
will flash green twice, to confirm the macro to be
programmed.
Example:
To program the
Macro 1
K
button so that it turns on the
CS3/CS5 and your TV, follow these steps:
• Press the
Macro 1
K
and
Mute
A
buttons at the same time and
then release them.
• Note that the
Program Indicator
will flash amber.
• Press the
TV Selector
0
.
• Press the
Mute
A
button to store the CS’s power on command.
• Press the
Screen Power On
button to store the TV Power On
Command.
• Press the
M N KL
Channel Up
9
button to complete the
process and store the macro sequence.
After following these steps, each time you press the
Macro 1
K
button, the remote will send all Power On commands.
Erasing Macro Commands
To remove the commands that have been programmed into one of
the Macro buttons, follow these steps:
1. Press the
Mute Button
A
and the
Macro Button
K
that
contains the commands you wish to erase.
2. Note that the
Program Indicator
will flash amber, and the red
LED under the
Input Selector
0
last used will turn on.
3. Within ten seconds, press the
Mute Button
A
.
4. The red LED under the Selector will go out, and the
Program
Indicator
will turn green and flash three times before it
goes out.
5. When the
Program Indicator
goes out, the Macro has been
erased.
30
LEARNING CODES FROM A REMOTE CONTROL
