background image

6

uSINg Your SouNdBAr SYSTEM

TURNING THE SOUNDBAR ON AND OFF

Set the soundbar’s Power switcn to the “On” position. Press the Power 

button on either the soundbar or the remote to turn the soundbar on. 

To put the soundbar in the Standby mode, press either Power button 

while the soundbar is on.

Power Button

Power Button

If you do not press the Power button, the soundbar will automatically 

go into the Standby mode approximately 10 minutes after the audio 

signal ceases. NOTE: If you have put the soundbar into the Standby 

mode by pressing the Power button, you must manually turn it on by 

pressing the Power button again. If the soundbar has automatically 

gone into the Standby mode 10 minutes after the audio signal has 

ceased, it will automatically turn itself on when it receives an audio 

signal at either input connection.

If you will be away from home for an extended period of time, or if 

you will not be using the soundbar for an extended period, set the 

soundbar’s Power switch to the “Off” position.

TURNING THE SUBWOOFER ON AND OFF

Set the subwoofer’s Power switch to the “On” position. Once the 

subwoofer and soundbar have been paired (see 

Pairing the Units 

for Wireless Operation,

 below) the subwoofer will turn on when the 

soundbar turns on and will remain on for approximately one minute 

after the soundbar enters the Standby mode, or for approximately 15 

minutes after the audio signal ceases.

If you will be away from home for an extended period of time, or if you 

will not be using the system for an extended period, set the subwoofer’s 

Power switch to the “Off” position.

PAIRING THE UNITS FOR WIRELESS OPERATION

After turning the soundbar and subwoofer on for the first time, you will 

need to “pair” the subwoofer and soundbar so they both operate at the 

same wireless frequency. To pair the units, press the Wireless Pairing 

switches on both units within 30 seconds of each other. The units will 

communicate with each other and operate at the same frequency.

PAIRING

PHASE

Soundbar 

Pairing Switch 

and LED

Subwoofer 

Pairing Switch 

and LED

NOTE: The maximum wireless operating distance between the 

soundbar and subwoofer is approximately 50 feet (15.3m).

ON-SCREEN INFORMATION DISPLAY

The soundbar’s on-screen information display (OSD) will appear on the 

screen of a TV connected to the HDMI ARC TV Out connector to verify 

operating status. The OSD will overlay on top of the TV’s video program 

for five seconds after you press a button on the soundbar or remote, 

then will disappear. (When you select an audio-only source connection 

(Aux, Optical, 

Bluetooth

), the OSD information will overlay a JBL splash 

screen.)

HDMI 2

Music Mode

OSD 

Overlay

Current  

Source

Volume 

Status

Sound  

Mode

•  Mute: When the audio signal is muted, the OSD will display the 

following icon:

•  

Bluetooth: 

The OSD will disolay the following icons during 

Bluetooth

 operation:

Bluetooth

 Pairing

Bluetooth

 Connected

Bluetooth

 Streaming

Bluetooth

 Not Connected

In addition to the status information, the OSD will also display 

messages if the selected HDMI connection can’t be detected or if the 

video signal is lost.

Содержание CINEMA SB400










Отзывы: