JBL CBT1000, Руководство по установке

Страница: 15 / 28

The following instructions apply to both the CBT1000 by itself and
to the CBT 1000+1000E System.
(For simplicity, drawings are shown with CBT1000 only.)
5) SLIDE SPEAKER WITH SPEAKER BRACKET ONTO WALL BRACKET
Make sure the PIVOT BOLT is installed in-place in the SPEAKER BRACKET . The PIVOT BOLT
ASSEMBLY consists of the M6 x 125 mm bolt with lock washer and flat washer on the head and secured
in place with flat washer, lock washer and M6 cap nut. IMPORTANT: Leave the nut loose (do not tighten).
Slide the speaker forward so that the SPEAKER BRACKET engages into the WALL
BRACKET, dropping the PIVOT BOLT ASSEMBLY into the hook slot of the WALL BRACKET .
For Down-Tilt or 0° Tilt
Install PIVOT BOLT before dropping
speaker into WALL BRACKET
Bolt Installed
Drop PIVOT BOLT into
hook slot of WALL BRACKET
For Down-Tilt or 0°
Hook Slot
For Up-Tilt
Bolt Installed
Drop PIVOT BOLT into
hook slot of WALL BRACKET
Install PIVOT BOLT before dropping
speaker into WALL BRACKET
Hook Slot
15