manualshive.com logo in svg
background image

English

TROUBLESHOOTING

If you used the high-level
(speaker) inputs and there 
is no sound from any of the
speakers:

• Check that the receiver/
amplifier is on and a source 
is playing.

• Check that the powered 
subwoofer is plugged into 
an active electrical outlet 
and is switched on.

• Check all wires and connec-
tions between the receiver/
amplifier and the speakers.
Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut
or punctured, or touching
each other.

• Review proper operation 
of your receiver/amplifier.

If there is low (or no) bass
output:

• Make sure the connections
to the left and right “Speaker
Inputs” have the correct 
polarity (+ and –).

• Make sure that the sub-
woofer is plugged into an
active electrical outlet and
switched on.

• Adjust the crossover point.

• Flip the Phase Control switch
to the opposite position.

• If you are using a Dolby
Digital/DTS receiver or 
processor, make sure that the
subwoofer adjustments on 
the receiver/processor are 
set up correctly.

• Slowly turn the Level Control
clockwise until you begin to
hear the desired amount of
bass.

If you used the line-level
inputs and there is no sound
from the subwoofer:

• Check that the receiver/
amplifier is on and a source is
playing.

• Check that the powered 
subwoofer is plugged into an
active electrical outlet and is
switched on.

• Check all wires and 
connections between the
receiver/amplifier and the
subwoofer. Make sure all
wires are connected. Make
sure none of the wires are
frayed, cut or punctured, or
touching each other.

• Review proper operation of
your receiver/amplifier.

• Slowly turn the Level 
Control clockwise until you
begin to hear the desired
amount of bass.

• Make sure that you have
configured your receiver/
processor so that the sub-
woofer/LFE output is on.

PHASE CONTROL

The Phase Control 

deter-

mines whether the sub-
woofer’s piston-like action
moves in and out in phase
with the main speakers or
opposite the main speakers.
There is no correct or incor-
rect setting. Proper phase
adjustment depends on sev-
eral variables such as sub-
woofer placement and lis-
tener position. Adjust the

phase switch to maximize
bass output at the listening
position.

Remember, every system,
room and listener is different.
There are no right or wrong
settings; this switch offers the
added flexibility to adjust your
subwoofer for optimum per-
formance for your specific 
listening conditions without
having to move your speak-

ers. If at some time in the
future you happen to
rearrange your listening room
and move your speakers, you
should experiment with the
phase switch in both posi-
tions, and leave it in the
position that maximizes bass
performance.

7

Содержание Balboa SUB/230









Отзывы: