b) Troubles during cycle
1 – JAMMING
During cycle, three types of jamming can occur and stop the machine cycling.
After the machine stops, the screen displays one message indicating the type
of jamming detected.
Remove paper jammed and press on the F1 key to erase the jamming message.
Message : « Entry jamming » or « Exit jamming »
To remove sheets under the punching unit :
-
Open the perspex cover
-
Maintain the upper belt support in high position by one hand
-
Pull out the paper with the other hand
Notice : if offcut paper remains jammed, close the perspex cover and get the tool into high
position (see page 12), then remove the sheets.
Message : « Reception jamming »
To remove or replace sheets jammed in reception :
- Proceed as indicated on page 17 to activate the reception coming down and gain
access to sheets.
2 – THREE OTHER MESSAGES CAN
BE DISPLAYED :
Message : « Emergency stop »
See page : 7
Message : « Cover open »
See page : 7
Message : « Confetti tray full »
This message displays if :
- Confetti tray full
empty the confetti tray
- The sensor and/or the reflector are dirty
clean the sensor and the reflector
21/24
