Assembly:
GSFR* Wheels to SFR
For this operation, disconnect the device, and dismantle the Cover by pushing the tabs. Use the
allen key and the spanner to assemble the following components.
1.
Insert the Intermediate Nozzle until its collar rests against the housing and tighten the screw.
2.
Assemble the Guide Wheel and tighten the screw. If you use a Guide Kit without Solder
Wire Perforation assemble the Support Wheel.
3.
If you have a Guide Kit with Solder Wire Perforation assemble the Blade first, then mount the
Blade Clamp onto the same axis and tighten the screw. If you use a Guide Kit without Solder
Wire Perforation, assemble the Traction wheel.
Caution:
handle the blade carefully to avoid injury.
4.
Insert the Inlet Nozzle into the hole and tighten the screw.
1
GSFR* with Solder Wire Perforation
GSFR* without Solder Wire Perforation
4
1
2
2
3
3
4
Blade
Blade Clamp
Inlet
Nozzle
Inlet
Nozzle
Guide
wheel
Traction
Wheel
Support
Wheel
Inter.
Nozzle
Inter.
Nozzle
*Not included, sold separately
4
