4
1.
Loosen the cartridge screw to release it. Place the new cartridge in the Auto-feed iron.
Mark
Changing cartridge
For a safe cartridge change, unplug the tool or turn the station off before following these guidelines:
2.
Align the tip of the cartridge with the solder Guide tube.
Important:
It is essential to insert the cartridge till the end for a good connection. Use the mark as
reference. Tighten the cartridge screw.
3.
You must leave
a gap of 8-10
mm
(0.31 - 0.40 in) between the tip and the end of the Guide tube.
4.
Loosen the guide screw. Adjust the Guide tube and tighten the screw.
8-10 mm
(0.31 - 0.40 in)
1
2
4
3
