jbc PSS, Инструкция по эксплуатации

Страница: 7 / 16

40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
4
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
7
Holder Angle
55º
Lever position for
a holder angle of 0º
Positioning
Lever
Inclined Position
To place the holder in an inclined position, lift the rear end slightly upwards and hold the holder in the
desired angular position (1).
With the other hand, turn the positioning lever upwards (2) and insert its stud into one of the openings
of the positioning arm (3). Do the same on the opposite side to completely fix the holder in the desired
position.
It is possible to choose between 4 different angular positions: 25º, 35º, 45º and 55º.
Note:
When
working at 55º and level 3 height, the total height of PSS reaches 24.5 cm (up to 30 cm at 90º).
To return the holder to the horizontal position, set the lever to its horizontal position (4) - for a holder
angle of 0º.
Caution:
When adjusting and changing the support positions, be aware that the metal
surfaces may be hot.
45º
35º
25º
Positioning
Arm