Features
2
3
C120 Cartridges
(Required but not supplied)
Control Unit
Stand
Ref. PA-SD
Manual
................................................ 1 unit
Ref. 0008846
Packing List
The following items should be included:
Micro Tweezers
...................................... 1 unit
Ref. PA120-A
Micro Tweezers
Ref. PA120-A
Micro Tweezers
Ref. PA120-A
2. Inserting
3. Aligning
4. Fixing
Align the tip of the cartridge. Use a flat
pliers in the indicated area for a correct tip
alignment.
Do not over-tighten the cartridge.
Changing cartridge
For a safe cartridge change, unplug the tool or turn the station off before following these guidelines:
Loosen the screw and remove the cartridge.
Use a flat pliers if still hot.
1. Removing
Important:
Tighten the screw again being
careful not to over-tighten. This is necessary
for the tool to function.
Important:
Insert the cartridge as far as
the mark for a correct connection.
Mark
Alignment
The PA120-A Micro Tweezers works with C120 cartridge range. Find the model that best suits your
soldering needs in
www.jbctools.com
ø0,7
1,5mm
ø 0,2
5mm
6mm
C120-009
C120-010
C120-004
C120-001
C120-005
C120-009
C120-010
Compatible cartridges
Suitable area
for a correct
contact
between the
flat pliers
and the
cartridge
www.jbctools.com
www.jbctools.com
