PAGE 1 OF 6
0623 IH-10799
1-800-295-5510
uline.com
SOLDERING STATION
H-10799
• Ensure safety devices function properly before use.
• Ensure moving parts are not sticking or damaged.
• Only use indoors and at room temperature.
• Protect unit against moisture and direct sunlight.
• Connecting control unit incorrectly poses a risk of
injury due to electric shock and can damage the
device.
• Only connect Weller® brand tools.
• If power supply cord is damaged, it must be
replaced with a specially prefabricated power
supply cord. Contact Uline customer service at
1-800-295-5510.
• Avoid touching earthed objects such as pipes,
heaters, cookers and refrigerators while using
product.
• Do not use soldering tool in a damp or wet
environment.
• Never work on voltage-carrying parts.
• Connect to properly grounded outlets only.
• Tool and safety holder may still be hot long after
unit has been turned off.
• Do not touch soldering tip during or after use.
• Keep away from flammable objects.
• Wear appropriate protective clothing to protect
against burns.
• Always wear eye protection when using soldering
station.
• When working with adhesives, special attention
must be paid to the warning information provided
by the adhesive manufacturer.
• Always keep combustible, flammable objects,
liquids or gases far away from soldering iron and
safety holder.
• Store soldering station in a dry, high or locked area
out of reach of children.
• Ensure unused soldering tools are free of voltage
and depressurized.
• Ensure machine is switched off before plugging in.
• Do not use cable for purposes other than intended.
• Never carry the unit by the cable.
• Do not pull cable to unplug from outlet.
• Protect cable against heat, oil and sharp edges.
SAFETY
PARTS
#
DESCRIPTION
1
Digital Station
2
Soldering Iron with Heat Resistant Cable
3
Chisel Style Solder Iron Tip
4
120 Volt Power Cord
5
Conical Support with Safety Rest Base
6
Cleaning Sponge
1
2
3
6
4
5
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
