Main menu
Main menu
Exit
1
Reset settings
2
Station settings
3
Tool settings
Station settings
Station settings
1 Temp unit
Celsius
2
Maximum temp 400
0
C
3 Minimum temp 200
0
C
4
Nitrogen mode
ON
N
2
outlet
Description
The MN is an electrovalve controlled by the soldering station that allows you to solder with nitrogen
with a minimum gas consumption.
Once the MN (Nitrogen Regulator Module) has been connected to the Control Unit, enter into the
Station Settings menu and switch on the Nitrogen Mode.
The module will let the gas flow when taking out the tool from the stand and turning off when the
tool is again placed in its stand and reaches the sleep temperature.
Connection to
soldering station
Recommended N
2
flow:
1-2 liters/minute
N
2
flow control
Pressure range supply
3-6 bar
Maximum pressure
6 bar
www.jbctools.com
3
