jbc HDE-1D, Инструкция по эксплуатации

Страница: 13 / 16

OK
350
ºC
Port
1
Power
45%
Temp. Levels
T245
250 350 380
17:14
OK
350
ºC
Port
1
Power
45%
Temp. Levels
T245
250 350 380
17:14
OK
350
ºC
Port
1
Power
45%
Temp. Levels
T245
250 350 380
17:14
13
CLM Features
Improve thermal transfer by cleaning the tip after each solder joint.
Brass wool
Ref. CL6210
Splashguard
Ref. 0017576
Very effective cleaning
method. It leaves a small
layer of solder on the tip to
prevent oxidation between
cleaning and rewetting.
It prevents splashing of
solder particles when
using the brass wool.
ESD Tip Wiper
Ref. CL0240
A temperature resistant
receptacle lets the
operator remove
excess solder by gentle
tapping or wiping.
Antisplash
Membrane
Ref. 0017574
Prevents splashing
to maintain the
work area clean.
Non-slip base
Sponge
Ref. S0354
No need to hold the base
while cleaning tips.
The least harmful
cleaning method. Keep
the sponge damp with
distilled water when
working to avoid tip wear.
Tapping: Wiping:
Tap to remove excess solder. Use the slots to remove remaining particles.
Maintenance
Before carrying out maintenance or storage, always allow the equipment to cool.
- Clean the station screen with a glass cleaner
or a damp cloth.
1.
Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2.
Press the new fuse into the fuse holder
and replace it in the station.
- Use a damp cloth to clean the casing and the
tool. Alcohol can only be used to clean the
metal parts.
- Periodically check that the metal parts of the
tool and stand are clean so that the station
can detect the tool status.
- Maintain tip surface clean and tinned prior to
storage in order to avoid tip oxidation. Rusty
and dirty surfaces reduce heat transfer to the
solder joint.
- Periodically check all cables and tubes.
Clean periodically
Fuse holder
Fuse holder
Fuse
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm