jbc FAE1-B, Инструкция по эксплуатации

Страница: 13 / 20

RJ12 station connections for Advanced range
Allows connecting JBC Soldering Stations featuring a USB-B port to the fume extractor in order to
automatically activate the extraction when the tools are in use. An USB A/B cable (ref. 0021042) and
RJ12-USB A adapter (ref. 0023504) are required. (You must not configure anything on the soldering
station).
RJ12-USB A adapter
+
USB A/B
Update
Allows updating a fume extractor via the USB-B connector.
Update the equipment software
Fume extractor can be updated by means of JBC Updater software. If you want to update
the equipment be aware there is not a station connected to RJ12 connectors. If a station is
connected to RJ12 connector the update process will not start. Download software from:
https://www.jbctools.com/software.html .
Continuous mode
When continuous mode is enabled, fume extractor suction is activated. Aspiration remains active
until continuous mode is disabled or the equipment is powered off (see details on page 9).
Fume extractor aspiration control priority:
RJ12 station connections / pedal > Continuous mode function
www.jbctools.com
13