Spare filters
Ref. 0005966
Cotton filters
Ref. 0781046
Suction filter
Ref. 0821830
Important:
Do not open the
Suction filter with
sharp pointed
objects to avoid
damage.
O Ring
Ref. 0007717
Filter cover
Ref. 0004710
www.jbctools.com
10
11
Changing the Heating Element
A
ø
B
ø
C360-003
ØA: 1.4
ØB: 1
Ømax.pin: 0.8
C360-002
ØA: 1.2
ØB: 0.8
Ømax.pin: 0.6
C360-004
ØA: 1.4
ØB: 1
Ømax.pin: 0.8
Fixing screw
Heating element
Ref. DSV-DS
1.
Remove by pulling the filter and the solder collector.
2.
Take out the fixing screw and withdraw the heating element.
3.
Insert the new heating element by following the same steps conversely.
Ø Inside tip
Ø Pin
C360-001
ØA: 1
ØB: 0.8
Ømax.pin: 0.4
C360-007
ØA: 1.9
ØB: 1.4
Ømax.pin: 1.2
C360-006
ØA: 3
ØB: 1.5
Ømax.pin: 1.3
Changing the Tip
Changing the Pump Filters
1.
Remove the tip by using a flat-nosed pliers.
Twist the tip and pull.
Compatible tips
The CS and CV desoldering stations work with C360 tip range. Check the model that best adapts to
your desoldering needs in
www.jbctools.com
Tip selection
Remember to select the biggest tip possible for your application: Ø inside tip > Ø Pin.
Solder Collector
2.
Insert the new tip and follow the same
steps conversely.
Important:
Change tips only when the tool is hot.
Do not hold the tip on the spring clamp.
Filter
Ref. 0008473
