jbc B-IRON 100 TOOL, Инструкция по эксплуатации

Страница: 7 / 12

7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Replacing Sealing Plugs
Note:
Depending on your handle model, two
different sealing plug references are available.
Before replacing the sealing plug, disconnect
the handle from the station and make sure the
device is not hot.
The sealing plug prevents undesirable flux vapors or particles from entering the handle. Its usage is
highly recommended for intensive applications when soldering is exposed to FOD environments or
for applications where the soldering iron works close to a vertical position.
1. Cutting 2. Removing
Replacing Grips
Make a length-ways cut on the worn grip.
Be careful not to damage the handle. Remove the worn grip.
Cutter
B0001
Grips for B·IRON Handles
3. Assembling New Grips
Firmly slide the grip onto the handle until it
locks into place.
Handle Sealing Plug
B·IRON 100 TOOL
OB4000
B·IRON 500 TOOL
B·NANO TOOL OB5000