5
JB INDUSTRIES
• DM4 Wireless Operating Manual • 630.851.9444 • [email protected]
Change Pressure Units
1. Press the ENTER button to reach the main menu
2. Select and highlight
Pressure Unit
3. Press the ENTER button
4. Scroll to the desired unit using UP
s
and DOWN
t
arrows
5. Press the ENTER button
6. On the left side of the screen “Data Saved” will show and the screens will be updated
Change Temperature Units
1. Press the ENTER button to reach the main menu
2. Select and highlight
Temp Unit
3. Scroll to the desired unit using UP
s
and DOWN
t
arrows
4. Press the ENTER button
5. On the left side of the screen “Data Saved” will show and the screens will be updated
Zero Pressure to Atmosphere
To zero pressure to atmosphere press the ZERO button on the display
The unit will beep to acknowledge the transducers are zeroed to atmosphere
User Defined Calibration (Temperature)
1. Press the ENTER button to reach the main menu
2. Select and highlight
User Cal
3. Press the ENTER button
4. Select and highlight
Temperature Cal
5. Select
ADJ Left
for the left thermocouple or
ADJ Right
for the right thermocouple
6. Press the ENTER button
7. Use the UP
s
to change the temperature reading up one digit
8. Use the DOWN
t
to change the place of the cursor
9. Press ENTER button when complete
Reset User Defined Calibration (Temperature)
1. Press the ENTER button to reach the main menu.
2. Select and highlight
User Cal
3. Press the ENTER button
4. Select and highlight
Temperature Cal
5. Press the ENTER button
6. Select
Reset Left
for the left thermocouple or
Reset Right
for the right thermocouple
7. Press the ENTER button
8. This will reset to factory default settings; to reset both at the simultaneously select
FACT Default
9. Press ENTER button when complete
