JB Systems Smooth Scan-Blue, Руководство по эксплуатации

Страница: 6 / 39

ENGLISH USER MANUAL
JB SYSTEMS ® 7/74 SMOOTH SCAN-BLUE LASER
4) IR remote MODE:
The laser can be controlled by the IR remote control:

Press the FUNC-button until the display shows: “REM”.

Press the ENTER-button to confirm your choice.
Note: In any standalone mode (excepted REM and SLA), press ON/OFF for 2 second to activate remote
function.
AUTO SHOW
MUSIC SHOW
LASER ON/OFF
COLOR
EFFECT PAUSE
CHANGING PATTERN
SOUND SENSIVITY
FIXED PATTERN (FROM 1 TO 48)
PATTERN REPEATING
Remote control details:
Button function Description
ON/OFF
In REM mode, turn on/off the laser. In any oder
standalone mode except SLAVE, press 2s to turn on the
REM mode
AUTO
Auto running show
MUSIC
Sound activated show, the blue is flashing when the
sound is detected.
Sound sensivity
In sound activated mode, press music+B+1to 9 to change
the sensivity settings
COLOR
CHANGING
To change the color from red to green or red & green
PATTERN
CHANGING
To show and change patterns
FIXED
PATTERN
You can select one pattern from 1 to 48
PATTERN
REPEAT
Last pattern and current pattern cycle repeating
5) DMX512 MODE:
The laser can be controlled by any standard DMX-controller in 2 different DMX-modes:

1 CHANNEL MODE: for extremely easy setup and use! (display shows “1Ch”)

17 CHANNEL MODE: for full control on every functionalities. (display shows “17c”)

Connect the DMX input of the laser to the DMX output of the previous unit in the chain or directly to the
DMX-output of your controller.

Press the FUNC-button until the display shows: “1Ch” or “17h”.
ENGLISH USER MANUAL
JB SYSTEMS ® 8/74 SMOOTH SCAN-BLUE LASER

Press the UP/DOWN buttons to select the DMX-mode. (1ch or 17ch)

Press the ENTER-button to confirm your choice.

Press the FUNC-button: the 3 digit number on the display starts blinking.

Select the DMX-address

Press the ENTER-button to confirm your choice.
Note: the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
Some more information on DMX512:
The DMX-protocol is a widely used high speed signal to control intelligent light
equipment. You need to “daisy chain” your DMX controller and all the connected light
effects with a good quality XLR M/F balanced cable. To prevent strange behavior of the
light effects, due to interferences, you must use a 90
Ω to 120 Ω terminator at the end of
the chain. Never use Y-splitter cables, this simply won’t work!
Each effect in the chain needs to have its proper starting address so it knows which commands from the
controller it has to decode.
1 CHANNEL DMX-CONFIGURATION OF THE LASER:
position
DMX-
value
function remarks
4 210-255 SOU Sound activated show
3 150-209 AUT Automatic show
2 090-149 SOP Sound activated pattern effect show
1 030-089 AUP Auto running pattern effect show
0 000-029 STANDBY Laser output off
17 CHANNEL DMX-CONFIGURATION OF THE LASER:
IMPORTANT REMARK: DMX Channel1 is used to set the different working modes of the laser.

To use the laser in full 17 channel mode, channel 1 must be set to value 221 or higher.

Depending on the DMX-values of channel1, different mode can be applied:
Channel
DMX-
value
function
CH1
Mode
000-040 Laser OFF
041-080 AUT
081-120 SOU
121-160 AUP
161-200 SOP
201-255 DMX MODE
CH2
Group
000-051 1 Group Patterns.
052-103 2 Group Patterns
104-155 3 Group Patterns
156-207 4 Group Patterns
208-255 5 Group Patterns
CH3 Pattern 000-255 Every 16 for 1 group, total 80 patterns.