JB Systems LED ClubHead, Руководство по эксплуатации

Страница: 8 / 80

ENGLISH OPERATION MANUAL
JB SYSTEMS
®
6/77 LED CLUBHEAD
Blackout Mode
Blackout mode: when no DMX-signal is detected, the unit goes in blackout and waits for the DMX-
signal.
No blackout mode: when no DMX-signal is detected, the unit automatically switches to standalone
mode.

Press the MENU button until is shown on the display.

Press the ENTER button, the display starts blinking.

Use DOWN and UP button to select (blackout on) or (blackout off) mode.

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again for about 2 seconds.
Pan Inversion
Normal: Panning movement is not inversed.
Pan inversion: Panning movement is inversed

Press the MENU button until is shown on the display.

Press the ENTER button, the display starts blinking.

Use DOWN and UP button to select (normal) or (pan inversion) mode.

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again for about 2 seconds.
Tilt Inversion
Normal: Tilt movement is not inversed.
Tilt inversion: tilt movement is inversed

Press the MENU button until is shown on the display.

Press the ENTER button, the display starts blinking.

Use DOWN and UP buttons to select (normal) or (tilt inversion) mode.

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again for about 2 seconds.
Led Display
Display on: display is always on.
Display off: display is off when not used.

Press the MENU button until the display shows .

Press the ENTER button, the display starts blinking.

Use DOWN and UP buttons to select (display always on) or (display off when not used).

Once the mode has been selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the MENU button again for about 2 seconds.
Display Inversion
Display normal: display is readable when the unit is on the floor.
Display inversion: display is readable when the unit is mounted upside down.

Press the MENU button until is shown on the display. (normal display)

Press the ENTER button to toggle between (normal display) and (display inversion).

After about 8 seconds your choice is automatically saved.
Focus Adjust
Used to help you adjusting the focus of the light beam and gobos.

Press the MENU button until is blinking on the display.

Press the ENTER button so the unit goes to the “tilt 90°” position.