ENGLISH
USER MANUAL
JB SYSTEMS
®
7/58
LASER BURST III
5) DMX512 MODE:
The laser can be controlled by any standard DMX-controller in 2 different DMX-modes:
1 CHANNEL MODE:
for extremely easy setup and use! (display shows “1Ch”)
11 CHANNEL MODE:
for full control of all possibilities. (display shows “11C”)
Connect the DMX input of the laser to the DMX output of the previous unit in the chain or directly to the
DMX-output of your controller.
Press the FUNC-button until the display shows: “1Ch” or “11C”.
Press the UP/DOWN buttons to select the desired DMX-mode. (1Ch or 11C)
Press the ENTER-button to confirm your choice.
Press the FUNC-button until the display shows a 3 digit number
Select the desired DMX-address (from 001 to 505)
Press the ENTER-button to confirm your choice.
Note:
the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
Some more information on DMX512:
The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
“daisy chain” your DMX controller and all the connected light effects with a good quality XLR M/F balanced
cable. To prevent strange behavior of the light effects, due to interferences, you must
use a 90
Ω
to 120
Ω
terminator at the end of the chain. Never use Y-splitter cables,
this simply won’t work!
Each effect in the chain needs to have its proper starting address so it knows which
commands from the controller it has to decode.
1 CHANNEL DMX-CONFIGURATION OF THE LASER:
CHANNEL
VALUE
DESCRIPTION
CH 1
MODES
000-019
Laser OFF (Black out)
020-039
SLD mode (Slow Moving Dots Effect)
040-059
FAD mode (Fast Moving Dots Effect)
060-079
SOD mode (Sound activated Moving Dots Effect)
080-099
SLL mode (Slow Moving Lines Effect)
100-119
FAL mode (Fast Moving Lines Effect)
120-139
SOL mode (Sound activated Moving lines Effect)
140-159
SLP mode (Slow Moving Patterns Effect)
160-179
FAP mode (Fast Moving Patterns Effect)
180-199
SOP mode (Sound activated Moving patterns Effect)
200-219
SRA mode (Sound activated Random Effect)
220-255
ARA mode (Auto Running Random Effect)
11 CHANNEL DMX-CONFIGURATION OF THE LASER:
IMPORTANT REMARK:
DMX Channel1 is used to set the different working modes of the laser.
To use the laser in full 11 channel mode, channel 1 must be set to value 251 or higher.
ENGLISH
USER MANUAL
JB SYSTEMS
®
8/58
LASER BURST III
CHANNEL
VALUE
DESCRIPTION
CH 1
MODES
000-019
Laser OFF (Black out)
020-039
ARA mode (Auto Running Random Effect)
040-059
SRA mode (Sound activated Random Effect)
060-079
SLP mode (Slow Moving Patterns Effect)
080-099
FAP mode (Fast Moving Patterns Effect)
100-119
SOP mode (Sound activated Moving patterns Effect)
120-139
SLL mode (Slow Moving Lines Effect)
140-159
FAL mode (Fast Moving Lines Effect)
160-179
SOL mode (Sound activated Moving lines Effect)
180-199
SLD mode (Slow Moving Dots Effect)
200-219
FAD mode (Fast Moving Dots Effect)
220-239
SOD mode (Sound activated Moving Dots Effect)
240-255
DMX MODE (other channels activated
CH 2
M1 ROT. SPEED
000-255
Motor1 Rotation Speed
CH 3
M1 ROTATION
DIRECTION
000-075
Motor1 clockwise rotation
076-150
Motor1 stop
151-255
Motor1 anti-clockwise rotation
CH 4
M1 SHAKE RANGE
000-255
Motor1 Shaking range
CH 5
M1 SHAKE MODE
000-056
Motor1 Shaking mode 1
057-112
Motor1 Shaking mode 2
113-168
Motor1 Shaking mode 3
169-255
Motor1 Shaking mode 4
CH 6
M2 ROT. SPEED
000-255
Motor2 Rotation Speed
CH 7
M2 ROTATION
DIRECTION
000-075
Motor2 clockwise rotation
076-150
Motor2 stop
151-255
Motor2 anti-clockwise rotation
CH 8
M2 SHAKE RANGE
000-255
Motor2 Shaking range
CH 9
M2 SHAKE MODE
000-056
Motor2 Shaking mode 1
057-112
Motor2 Shaking mode 2
113-168
Motor2 Shaking mode 3
169-255
Motor2 Shaking mode 4
CH 10
COLORS
000-028
RED + GREEN
029-056
GREEN
057-084
RED
085-112
RED off, strobed GREEN
113-140
GREEN off, strobed RED
141-168
RED on, strobed GREEN
169-197
GREEN on, strobed RED
198-224
Both RED and GREEN strobed
225-255
RED and GREEN alternately strobed
CH 11
STROBE
000-255
Slow to Fast
