![background image](http://html1.mh-extra.com/html/jb-systems/ez-con-6/ez-con-6_operation-manual_636369006.webp)
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
4/4
EZ-CON 6
5. [UPDATE] MICRO USB CONNECTOR:
this connector is for updating the firmware of the controller.
6. POWER SWITCH:
used to switch ON/OFF the controller
.
7. MAINS INPUT
with IEC14 socket and integrated fuse holder, connect the supplied mains cable here.
ADDRESSING THE CONNECTED UNITS
Each time you build a different installation with the EZ-CON 6, you should check the DMX addresses of the
connected projectors.
•
Fader 1 = DMX address 001
•
Fader 2 = DMX address 002
•
Fader 3 = DMX address 003
•
Fader 4 = DMX address 004
•
Fader 5 = DMX address 005
•
Fader 6 = DMX address 006
SPECIFICATIONS
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Power Input:
AC 110-240V, 50/60Hz
DMX output:
3pin XLR, 6ch.
Size:
180 x 135 x 55 mm
Weight:
0.9 kg
The information is subject to change without prior notice. You can download the latest version of
this user manual on our website: www.jb-systems.eu