background image

ENGLISH 

 

OPERATION MANUAL 

 

 
JB SYSTEMS

®

 

2/4 

EZ-CON 6 

SAFETY INSTRUCTIONS: 

  To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  

  To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when 

bringing  it  into  a  warm  room  after  transport.  Condense  sometimes  prevents  the  unit  from  working  at  full 
performance or may even cause damages. 

  This unit is for indoor use only.  

 

Don’t place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be 
placed  on  this  appliance.  Electric  shock  or  malfunction  may  result.  If  a  foreign  object  enters  the  unit, 
immediately disconnect the mains power. 

  No naked flame sources, such as lighted candles, should be placed on the appliance. 

 

Don’t cover any ventilation openings as this may result in overheating.  

  Prevent use in dusty environments and clean the unit regularly. 

  Keep the unit away from children. 

  Inexperienced persons should not operate this device. 

  Maximum save ambient temperature is 40

°C. Don’t use this unit at higher ambient temperatures. 

  Always unplug the unit when it is not used for a longer time or before you start servicing. 

  The electrical installation should be carried out by  qualified personal only, according to the regulations for 

electrical and mechanical safety in your country. 

  Check that the available voltage is not higher than the one stated on the rear panel of the unit. 

  The socket inlet shall remain operable for disconnection from the mains. 

  The power cord should always be in perfect condition: switch the unit immediately off when the power cord 

is squashed or damaged. It must be replaced  by the  manufacturer, its service agent or similarly  qualified 
persons in order to avoid a hazard 

  Never let the power-cord come into contact with other cables! 

  In  order  to  avoid  a  hazard,  the  unit  shall  only  be  used  with  the  AC-adaptor  delivered  with  it.  If  the  AC-

adaptor is damaged, a same model adaptor shall be used only.  

  In  order  to  prevent  electric  shock,  do  not  open  the  cover.  Apart  from  the  mains  fuse  there  are  no  user 

serviceable parts inside. 

 

Never

 repair a fuse or bypass the fuse holder. 

Always

 replace a damaged fuse  with a fuse of the same 

type and electrical specifications! 

  In the event of serious operating problems, stop using the appliance and contact your dealer immediately. 

  Please use the original packing when the device is to be transported. 

  Due to safety reasons it is prohibited to make unauthorized modifications to the unit. 

 

MAINTENANCE 

Clean by  wiping  with a polished cloth slightly dipped  with water. Avoid getting  water inside the unit. Do not 
use volatile liquids such as benzene or thinner which will damage the unit. 
 

 

CAUTION:

  To  reduce  the  risk  of  electric  shock,  do  not 

remove  the  top  cover.  No  user-serviceable  parts  inside. 
Refer servicing to qualified service personnel only. 

 

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the 
use or the presence of un-

insulated “dangerous voltage” within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of electric shock. 

 

The exclamation point within the equilateral triangle is intended to alert the user to the presence 
of  important  operation  and  maintenance  (servicing)  instructions  in  the  literature  accompanying 
this appliance. 

 

This symbol means: indoor use only

 

 

This symbol means: Read instructions

 

 

This symbol means: Lamp Control Gear 

 

The  device  is  suitable  for  mounting  on  standard  flammable  surfaces.  Standard  flammable 
surfaces  include  building  materials  such  as  wood  and  wood-based  materials  more  than  2mm 
thick. 

Содержание EZ-CON 6









Отзывы: