ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
5/10
CAM-LITE 200
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use ▲/▼ buttons to select the desired mode:
•
5MSL mode:
[PAN/TILT] are music controlled while the dimmer, strobe speed, colors & special
functions like zoom can be set using only 5 DMX channels.
•
15 CH mode:
reduced DMX control (same as 43CH mode but without Pan/Tilt fine nor pixel control)
•
37 CH mode:
control on all functions except for the internal programs (Macro
’s)
•
43 CH mode:
Full DMX-control on all functions.
•
Once the correct option shows on the display, press the [ENTER] button to confirm.
[DMX Functions > No DMX]
Used to set how the projector reacts when the DMX-signal disappears.
•
Press the [MENU] button to access the different functions in the menu.
•
Press
the ▲/▼ buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use ▲/▼ buttons to select the desired mode:
•
Sound:
the projector starts working in audio mode.
•
Freeze:
output based on the last valid DMX-signal is kept on the projector.
•
Blackout:
output turns black while no DMX is detected.
•
Once the correct option shows on the display, press the [ENTER] button to confirm.
Note: as soon as the input detects a DMX-signal, blackout, freeze or audio mode will be cancelled.
[DMX Functions > View DMX Value]
Shows the value of each function of the fixture on every moment. Used for problem solving.
•
Press the [MENU] button to access the different functions in the menu.
•
Press the
▲/▼ buttons until the desired function is showing on the display.
[Fixture Settings > Dimmer Curve]
Used to set the dimmer curve of the master dimmer.
•
Press the [MENU] button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use
▲/▼ buttons to selected the desired curve:
•
Once you have the desired curve, press the [ENTER] button to save it.
[Fixture Settings > Refresh Rate]
Used to set the refresh rate of the projector for the best result when used with camera.
•
Press the [MENU] button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed (800Hz, 1200Hz, 2000Hz, 3600Hz, 12kHz and 25kHz
•
Use
▲/▼ buttons to selected the desired value.
•
Once you have selected the desired value, press the [ENTER] button to save it.
[Display Settings > Display Inverse]
Used to turn the display over 180°. [Yes] = display is upside down.
•
Press the [MENU] button to access the different functions in the menu.
•
Press
the ▲/▼ buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the display can be turned by selecting [Yes] or [No].
