ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
3/10
CAM-LITE 200
DESCRIPTION:
1. HANGING BRACKET:
You can use the hole in the center of the bracket to fix a hook or truss clamp.
2. KNOB FOR HANGING BRACKET:
For tightening the hanging bracket to keep it in its position.
3. BARNDOORS (SMALL):
To delimit the beam in horizontal directions.
4. BARNDOORS (BIG):
To delimit the beam in vertical directions.
5. BUTTONS:
to select different options of the setup MENU:
•
MENU-button:
used to enter/exit the setup MENU.
•
▼-button:
used to go to the next MENU option or to decrease a parameter value.
•
▲-button:
used to go to the previous MENU option or to increase a parameter value.
•
ENTER-button:
used to select a MENU option or confirm a setting.
6. DISPLAY:
shows the information on the different modes and functions.
7.
Indicator LEDs [MASTER-DMX]
8.
Rubber foot.
9. MAINS INPUT:
Lockable Power Connector 10A - Neutrik PowerCON
®
compatible. Connect the supplied
mains cable or an extension cable here.
10. MAINS OUTPUT:
used to daisy chain the power to several other projectors. Always pay attention to the
maximum load while adding projectors! Special Multi cables (PowerCON
®
+ DMX XLR-cables are
optionally available: see our website!)
11. DMX IN:
3pin XLR connector used to connect the projector with other units or a DMX-controller. The DMX-
input is also used to update the firmware of the projector, see the upgrade instructions on our website.
12. DMX OUT:
3pin XLR connector used to daisy chain the projector with other units.
13. M-DMX INPUT:
Please note that this USB-connector is NOT used for updates or to connect the unit to a
PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the (optional)
WTR-DMX DONGLE from BRITEQ
®
and you will get wireless DMX! Moreover you will be able to connect
other DMX-controlled equipment to the DMX-output so you can share the wireless DMX function with all
connected units! No extra settings to be made in the setup menu, just follow the procedure in the user
manual supplied with the WTR-DMX DONGLE from BRITEQ
®
.
The separate WTR-DMX DONGLE is
available from WWW.BRITEQ-LIGHTING.COM (order code: B04645)
14. FUSE HOLDER
15.
“COLOR TEMP” KNOB:
to increase or decrease the color temperature between 3000K and 6300K
16.
“DIMMER” KNOB:
to increase or decrease the light output level from 0 to 100%
SETUP MENU:
•
This is the list of all the functions in the machine.
•
To select any of these functions, press the [MENU] button and use the
[▲/▼] buttons to browse the menu.
•
Select the desired function with the [ENTER] button.
•
Use
[▲/▼] buttons to change the mode or value.
•
Once the required mode or value is selected, press the [ENTER] button to select.
