JB-Lighting Varycolor 2000, Руководство пользователя

Страница: 44 / 48

Varycolor 2000
- 44 -
Occupation of connectors and jumpers
sketch connector
Pin/colour Pin/colour Pin/colour Pin/colour Stecker
dimmer1 1 orange 2 blue 3 red 4 yellow JP8
dimmer2 1 orange 2 blue 3 red 4 yellow JP9
colour 1 orange 2 blue 3 red 4 yellow JP4
effect 1 orange 2 blue 3 red 4 yellow JP3
gobo 1 orange 2 blue 3 red 4 yellow JP5
ventilator 1 free 2 free 3 black 4 red JP7
AC-IN 1 black 2 black JP6
DMX-IN/OUT 1 green 2 red-white 3 beige 4 black JP1
Change of Eprom/ Software Update
To change the Eprom proceed as follows:
Open the lid of Varycolor 2000. Now remove the right side-piece with the electronic card.
Remove the cover sheet for the electronic card by taking out the 4 screws (see sketch page
31). By comparing the electronic card with the plan of electronic parts (see sketch page 47),
you can see the Eprom at the bottom of the right side (IC U2). Carefully lever the used Eprom
from the holder and exchange it for a new one.
Direction: Pay attention to the polarity of the Eprom!
(The inlet of the Eprom has to point to the same direction
as the inlet of the IC-holder.)
Now assemble your Varycolor 2000. Plug in your Varycolor and please test all functions.