background image

- 30 -

P9

Via the control channel different functions of the fixture can be switched. The following functions 
can be switched via the control channel.
Response of the headlamp when dimming via faders
BACKLIGHT MODE - display backlight
DISPLAY ORIENTATION - display orientation
MAIN SCREEN MODE - main screen view
USER FIXTURE ID SET - set headlight number
DIMMER CURVE - dimmer curve adjustment
FROST CURVE - setting the frost curve
PAN / TILT SPEED - pan / tilt speed
EFFECT SPEED - effect speed
LED FADE OUT MODE - type of dimming
COOLING MODE - adjust the fan volume and brightness
CAMERA MODE - sets the LED refresh rate
RESET - a basic reset of the headlight is performed
For details, see DMX Channel Functions for the P9 Beamspot on page 24.

7.1.3 Control channel

To activate the autofocus function, set the autofocus distance channel to around 50%. Then best 
use gobo wheel 2 for fine adjustment of the system and set the focus accordingly to 125 (32000): 
Then set the distance to the headlight by focusing the headlight using the autofocus distance. As 
a guideline, DMX value divided by 10 corresponds to the distance (DMX 100/10 distance = 10m). 
Now the headlight can be operated with autofocus via the zoom. Using the following table, the 
focus values for the individual effects can now be preselected and zoomed in with autofocus.

7.1.5 Auto focus

Animation effects can be created via this channel in connection with the focus. Depending 
on the intensity, the projection can be made to shake more or less. This effect can be dimmed 
or switched.

7.1.4 Sparkle effect, sparkle speed

7.2 Artnet

The spotlight can be controlled via Artnet - ArtNET 4. To do this, set the Artnet address via the 
menu item DMX / NET ADDR -> ARTNET ADDRESS and also select it via the menu item PER-
SONALITY -> DMX INPUT CONFIG -> NETWORK -> MODE -> ARTNET. In addition, define the 
IP address of the spotlight via PERSONALITY -> DMX INPUT CONFIG -> NETWORK -> IP AD-
DRESS. Further details and setting options can be found on page 18

Gobo1

Gobo2

Open

Iris

Focus 8Bit

95

125

215

Focus 16Bit

24320

32000

55040

Содержание P9 Beamspot













































Отзывы: