JB-Lighting P4, Руководство по эксплуатации

Страница: 40 / 60

P4
- 40 -
For the correct adjust-
ment move the bulb hol-
der upwards by using a
screwdriver in slot (2).
For the correct adjust-
ment move the bulb hol-
der downwards by using
a screwdriver in slot (2).
D: Hotspot shifted upwards
Image on the wall:
E: Hotspot shifted downwards
Image on the wall:
2
2
4.7 Rigging the fixture
WARNING: Keep fixtures at least 1,0 m away from high inflammable material! The
special design of the temperature filter has allowed to reduce distance between the
fixture and lit objects, but the minimum distance of 10 meters between light output
from the moving head and the lit objects must be kept!
!
The P4 can either be placed on the floor or hang on a
trussing system in any position. When placing the unit
on the floor make sure that it stands on rigid ground, be-
cause the air inlets in the base must not be covered with
anything! To mount the unit on a trussing system use two
of the original JB-Lighting omega brackets with Cam-
loc-connectors. The Camlocs must snap in to be locked
properly. Ensure that the structure (truss) to which you
are attaching the fixture is secure. If you install the fixture
to a truss always attach a safety cable, that can hold at
least 10 times the weight of the fixture.
140
224
14
0