Rev-B
Page
4
of
8
ASSEMBLY (REQUIRES 2 PEOPLE):
1)
Lay parts out on clean dry flat surface. NOTE: There is a left and right side frame,
distinguished by the offset to accommodate the Foot Boards. Identify each frame
and install keeping the offset to the outside of the goal.
2)
Assemble both side frames onto the Top Crossbar, as shown in Figure 1.
Figure 1
3)
Insert the End Caps into the bottom of the frame.
4)
Install the Crossbars as shown in Figure 2a & 2b. Loosely install all hardware.
Make sure the goal is square and the top fully inserted and then tighten all
hardware.
2” SQUARE TUBE CAP
TOP FRONT CROSSBAR
RIGHT SIDE FRAME
LEFT SIDE FRAME
1-1/2” SQUARE TUBE
CAP
